Staples can be driven through the edge of the backing board at an angle, which is handy when the sandwich is thick. Use with a balancer. Uses '40' staples.

The CS'6-25' JUMBO fires only special longer 25mm Cassese JUMBO flexipoints, which are ideal for larger ready-made frames. They are 0.53mm thick. Free box of 3000 Jumbo points included with driver.

Most OMER air flexipoint drivers fire 15mm T-M Flexible Semi-Rigid flexis.
OMER 53 The standard driver. It fires Standard 15mm x 0.38mm tabs and is ideal for all general purpose framing.

All OMER drivers are very well built and proven to be reliable.
In our experience, most drivers only fail after being dropped and this is not covered by warranty. We suggest that you always suspend them over the work bench using a balancer.

Most OMER air flexipoint drivers fire 15mm T-M Flexible Semi-Rigid flexis.
OMER 53.V is similar to the 53.4, but has a repeater action.

All OMER drivers are very well built and proven to be reliable.

In our experience, most drivers only fail after being dropped and this is not covered by warranty. We suggest that you always suspend them over the work bench using a balancer.

BANTAM flexipoint drivers have the patented AUTOBEND feature to automatically bend down the special 15mm B-T tabs flush with the surface of the backing board.

The 'S' model is single shot, and the 'R' model has an adjustable repeating facility. Both have 'side-exit' facility.

The hammer blade is supported during its full stroke to eliminate jamming and breakage.

Note: BANTAM drivers will only operate with 'B-T' tabs.