Blade holder pivots, guiding the blade tip through the very fine slot. Cutting tip is not visible when in use, but start and stop positions are marked.

4000 (Part no. 1064) has marker bar, to mark borders from ¼" to 5".

Uses '270' blades.

See 6131 for Plastic Guides set.

Blade holder pivots, guiding the blade tip through the very fine slot. Cutting tip is not visible when in use, but start and stop positions are marked.

4000 has marker bar, to mark borders from ¼" to 5".

Uses '270' blades.

See 6131 for Plastic Guides set.

Positive depth control ensures that you don't go too deep into the undersheet.

Blade locks away when not in use. Glides along any straight edge. Not suitable for left handed people.

Uses '270' blades.

Make square cuts or 45° bevel cuts on foamboard up to 5mm thick, simply by turning the tool over.

Adjustable blade location allows you to set it to the board thickness.

Uses '492' blades (Part no. 2420).

Extruded aluminium straight edge with rubber insert strips to grip the surface, except 3686.

One edge has an easy-read metric / inches scale. The other has a specially shaped lip.

Ready to use with any of the Logan 2000 / 302, 3000 or 4000 cutters.

Nylon guides included, which screw to the cutters.