Vertical cutting head for Fletcher F-T 1100 Oval Cutter (Part no. 1836).

Spare '701' Straight Cutting Head for Logan mount cutters, clips to most Logan cutter rails.

Mount Cutter Maintenance:

Regular calibration and cleaning of your mountcutter is essential. Always keep it covered with a cloth (Part No. 2864) when not in use, this will keep off the dust which settles overnight.

KeenCut mountcutters should only be cleaned with a dry cloth and vacuum. Stubborn marks may be removed with a damp cloth with a little detergent.

To clean Fletcher-Terry and C&H cutter bars use Lighter Fluid (Part no. 502). Lay a piece of scrap board under the running rail to protect the baseboard and squirt fluid over the rail. Work in with tissue paper and clean off all the accumulated dirt.

When dry, spray Formula 5/2 Dry PTFE Lubricant onto the rail and work the head up and down before cleaning off all the excess.

Use 5/2 also in the chute of your underpinner, etc. Silicone free.