SeaLion CANVAS TEXTURE

190µ thick PVC hot laminating film with a pronounced coarse canvas texture. Being so thick the canvas effect it produces can remove the need for 'stripping' traditional photos. It works especially well on digital and ink jet prints. Take care - don't apply too much heat, tension or pressure. 648mm x 25m


SeaLion Cold & Hot Mounting and Laminating Materials

Most SeaLion materials are made for us in UK, in a specialised factory which works to the highest technical and environmental standards. They have been producing high quality coated films for many years and have a huge amount of experience.

SeaLion PRO Dry Mount Tissue - Hot Melt

PRO DMT has a tissue base, is breatheable and sometimes heat reversible. The adhesive polymer is applied using a high viscosity hot melt coating process. No solvents are used.

SeaLion PRO DMT should not be used at more than 84°C and should not be kept under pressure for more than 3 mins with materials which have porous surfaces or 4 mins for non-porous surfaces.

Maintain the highest viscosity of the PRO DMT adhesive by using the minimum temperature, resulting in the greatest hot tack and shortest cooling time. If the adhesive gets too hot for too long, it can soak into the materials, away from the contact faces.

PRO DMT is ideal for bonding most normal materials, mountboard, prints, white liner board, foam board, etc. Some users find it satisfactory with MDF, but there are different grades around, so remove any dust and test.

PRO DMT - Activation: Photos and coated papers, bond paper and coated litho prints: 78°C, 1.5 - 3 min, approx.
Thin bond papers and other fibrous materials: 82°C, 45 sec, approx.

Temperature control on many presses is often inaccurate. Pressure, humidity and the thickness of the workpiece can all affect the optimum temperature and the dwell time. Always test first. Made in USA.

622mm x 45.7m roll.


SeaLion Cold & Hot Mounting and Laminating Materials

Most SeaLion materials are made for us in UK, in a specialised factory which works to the highest technical and environmental standards. They have been producing high quality coated films for many years and have a huge amount of experience.

SeaLion PRO Dry Mount Tissue - Hot Melt

PRO DMT has a tissue base, is breatheable and sometimes heat reversible. The adhesive polymer is applied using a high viscosity hot melt coating process. No solvents are used.

SeaLion PRO DMT should not be used at more than 84°C and should not be kept under pressure for more than 3 mins with materials which have porous surfaces or 4 mins for non-porous surfaces.

Maintain the highest viscosity of the PRO DMT adhesive by using the minimum temperature, resulting in the greatest hot tack and shortest cooling time. If the adhesive gets too hot for too long, it can soak into the materials, away from the contact faces.

PRO DMT is ideal for bonding most normal materials, mountboard, prints, white liner board, foam board, etc. Some users find it satisfactory with MDF, but there are different grades around, so remove any dust and test.

PRO DMT - Activation: Photos and coated papers, bond paper and coated litho prints: 78°C, 1.5 - 3 min, approx.
Thin bond papers and other fibrous materials: 82°C, 45 sec, approx.

Temperature control on many presses is often inaccurate. Pressure, humidity and the thickness of the workpiece can all affect the optimum temperature and the dwell time. Always test first. Made in USA.

622mm x 91m roll.


SeaLion Cold & Hot Mounting and Laminating Materials

Most SeaLion materials are made for us in UK, in a specialised factory which works to the highest technical and environmental standards. They have been producing high quality coated films for many years and have a huge amount of experience.

SeaLion PRO Dry Mount Tissue - Hot Melt

PRO DMT has a tissue base, is breatheable and sometimes heat reversible. The adhesive polymer is applied using a high viscosity hot melt coating process. No solvents are used.

SeaLion PRO DMT should not be used at more than 84°C and should not be kept under pressure for more than 3 mins with materials which have porous surfaces or 4 mins for non-porous surfaces.

Maintain the highest viscosity of the PRO DMT adhesive by using the minimum temperature, resulting in the greatest hot tack and shortest cooling time. If the adhesive gets too hot for too long, it can soak into the materials, away from the contact faces.

PRO DMT is ideal for bonding most normal materials, mountboard, prints, white liner board, foam board, etc. Some users find it satisfactory with MDF, but there are different grades around, so remove any dust and test.

PRO DMT - Activation: Photos and coated papers, bond paper and coated litho prints: 78°C, 1.5 - 3 min, approx.
Thin bond papers and other fibrous materials: 82°C, 45 sec, approx.

Temperature control on many presses is often inaccurate. Pressure, humidity and the thickness of the workpiece can all affect the optimum temperature and the dwell time. Always test first. Made in USA.

1028mm x 91m roll.


SeaLion Cold & Hot Mounting and Laminating Materials

Most SeaLion materials are made for us in UK, in a specialised factory which works to the highest technical and environmental standards. They have been producing high quality coated films for many years and have a huge amount of experience.

SeaLion PRO Dry Mount Tissue - Hot Melt

PRO DMT has a tissue base, is breatheable and sometimes heat reversible. The adhesive polymer is applied using a high viscosity hot melt coating process. No solvents are used.

SeaLion PRO DMT should not be used at more than 84°C and should not be kept under pressure for more than 3 mins with materials which have porous surfaces or 4 mins for non-porous surfaces.

Maintain the highest viscosity of the PRO DMT adhesive by using the minimum temperature, resulting in the greatest hot tack and shortest cooling time. If the adhesive gets too hot for too long, it can soak into the materials, away from the contact faces.

PRO DMT is ideal for bonding most normal materials, mountboard, prints, white liner board, foam board, etc. Some users find it satisfactory with MDF, but there are different grades around, so remove any dust and test.

PRO DMT - Activation: Photos and coated papers, bond paper and coated litho prints: 78°C, 1.5 - 3 min, approx.
Thin bond papers and other fibrous materials: 82°C, 45 sec, approx.

Temperature control on many presses is often inaccurate. Pressure, humidity and the thickness of the workpiece can all affect the optimum temperature and the dwell time. Always test first. Made in USA.

1232mm x 45.7m roll.


SeaLion Cold & Hot Mounting and Laminating Materials

Most SeaLion materials are made for us in UK, in a specialised factory which works to the highest technical and environmental standards. They have been producing high quality coated films for many years and have a huge amount of experience.