These have a steel tensioning mechanism and steel banding, which cannot stretch. The corner pieces are plastic. Side handle is unlocked and banding fed out before locking, and tensioning with the main handle.

(NOTE- The spring around the coil of banding should be eased around the coil, DO NOT pull the banding out of the coil).

Rectangular frames:
A - Medium Duty, with 6mm wide banding.

Lubricate screw threads regularly. Do not over-tighten.

These have a steel tensioning mechanism and steel banding, which cannot stretch. The corner pieces are plastic. Side handle is unlocked and banding fed out before locking, and tensioning with the main handle.

(NOTE- The spring around the coil of banding should be eased around the coil, DO NOT pull the banding out of the coil).

Rectangular frames:
B - Heavy Duty, with 10mm wide banding.

Lubricate screw threads regularly. Do not over-tighten.

These have a steel tensioning mechanism and steel banding, which cannot stretch. The corner pieces are plastic. Side handle is unlocked and banding fed out before locking, and tensioning with the main handle.

(NOTE- The spring around the coil of banding should be eased around the coil, DO NOT pull the banding out of the coil).

Octagonal frames:
C - Only for 8 sided octagonal frames.

Lubricate screw threads regularly. Do not over-tighten.

Ideal underpinner for high-quality low volume framing. It is precision engineered in steel and aluminium, and each is carefully assembled by hand in UK.

Your mitred mouldings are individually clamped in the smooth face jaws and each piece can be adjusted to ensure perfect alignment.
The pressure head is adjusted to place the wedge in your chosen position. Wedges should be positioned roughly 1/3 and 2/3 across the line of the join. They should be approx half the height of the wood at the point of insertion.
The Kimberley has a unique feature which ensures that the wedge position from below always exactly corresponds to the plunger position above.
Wedges, of any type, from 5mm to 15mm, are placed individually on the magnetic feed.

Kimberley has a magnetic face on the plunger, onto which sits a felt faced L-shaped pressure pad. The hard felt protects the finish on your mouldings.
When joining taller mouldings,

Traditional style of framers vice which meets every requirement for a picture framers clamp for holding square corners, while you pin them, or while the glue sets. The 'STANLEY' type mitre vice is made from cast iron.

It will clamp most mouldings up to 100mm / 4" wide, and join any frame larger than 90mm x 90mm / 3.5" x 3.5".

Two sides of the frame are held firmly for gluing and pinning. Universal base allows the clamp to be rotated or tilted.