This incorporates all the experience gained by Cassese over many years of underpinner design.

The special feature is the built-in rebate clamp. This pushes the mouldings firmly together and holds them while the wedge is inserted.

The precision cast aluminium table is mounted on three tubular steel legs. The shape of the top means that you can butt it up to your work table to support larger frames.

Other features include:

• Only coarse adjustment of the top plunger required for different moulding from 7mm up to 85mm high.

• Easy to adjust for moulding widths from 5mm to 95mm.

• Easy setting for two wedge positions.

• Makes frames down to 40mm x 40mm.

• Fine adjustment of mitre angle and tilting fences.

• Joins soft and hardwood without difficulty, using standard or hardwood Cassese wedges in plastic cartridges. These are easy to insert and remove without wastage, to allow you to quickly change the length or type.

The CS-88 is foot operated. The foot pedal can be pivoted to any of the three legs, so you can choose your own working position.


Equipment Service

Lion have a huge stock of spares for most makes of framing equipment. And if we don't have it - we can usually get it.
Our Technical Specialist is Stewart James-Dyke, on ext. 229, or stewart@lionpic.co.uk He can service most equipment that you bring in, by appointment. Or contact:

Mark Thornton, Yorkshire, 07980 303 715
mt4service@blueyonder.co.uk
Neil Stout, Leicester, 07793 709 123
neil@framingengineer.com
Mark Griffiths, Essex, 07859 818 233
markg94@tiscali.co.uk


For our latest special prices on equipment, click on document below, for further information please contact our sales team.

Clean and lubricate the hammer on your Cassese machine regularly.

Spare Cassese Hammer Long, 125mm. For CS-810 and 276 Proturner.

Replacement cable. If you have any query on fitting, talk to our technical department. Two cables in a pack. For Cassese CS-88 only.

For most CASSESE Underpinners

This LION device makes Cassese and later Pro-Turner underpinners easier to use.

It features a circular magnet, to which clings an L-shaped steel pressure pad, faced with hard felt.
The assembly slides into place, replacing the moulded plastic pad. Once in place, the L-shaped pad is easily positioned to exactly suit the profile of the moulding.

The depth of the pad allows it to settle into the shaped profile of most spoon mouldings.

Moulding support wings for Minigraf Alpha 1/M & 1/M Super only.