The Fletcher FlexiMaster, green, fires only Fletcher Flexible Points.
When fired into the rebate of a frame, they can be bent back to allow the frame back to be removed and replaced.

Points are 0.41mm thick. 6 month warranty.

See 3061 & 3062 for F-T Flexible Points.

A sturdily built driver for those framers who prefer traditional triangle and diamond points. Do not fit Columbus.
The Fletcher #5 Driver takes points:
#1 3/8" / 9.5mm diamonds (Part no. 445)
#2 1/2" / 13mm diamonds (Part no. 3748)
#5 11mm triangles (Part no. 3581)

The Fletcher FrameMaster, black, is a well thought out rigid point driver, made largely in industrial grade re-inforced polymer.

The whole mechanism has a minimum of moving parts.
Patented design of the nosepiece ensures that the points are flush with the backing board when inserted.
Reversing the magazine adapts it to fire either the shorter 8mm Glaziers points (Part no. 448) or the longer 16mm Framers points (Part no. 447). It holds a stick of 100 of either. Both are 0.66mm thick. It will not fire any flexible points.

Most framers use the 16mm long Framers points, which give even pressure on the backing board, and compensate for any cutting errors in the board.

Fletcher MultiMaster, yellow, fires the uniquely shaped bendable MultiPoints. They are roughly rectangular in shape, with two barbs and 4.5mm round hole.
The two barbs hold it firmly into the wood and the MultiPoint is bendable allowing the frame back to be removed and re-fitted.
The special feature of the MultiPoint is that it can be used to join two frames together when assembling shadow boxes.
Fire it into the side of the lower frame and then put a screw through it into the upper frame. This holds the two frames together, yet allows them to be easily dismantled. 6 month warranty.

See 4731 for F-T MultiPoints.