Made by Morso using steel produced especially in Austria, which gives them an excellent quality and a very long life. This is due to the hardness of the blades which is HR64 where other brands are often max. HR58.

Morso blades are a little more expensive than other brands but some say they will last up to 6 times longer.

You will need three pairs of blades - one on the machine, one ready to put on and one away for sharpening.

Made by Morso using steel produced especially in Austria, which gives them an excellent quality and a very long life. This is due to the hardness of the blades which is HR64 where other brands are often max. HR58.

Morso blades are a little more expensive than other brands but some say they will last up to 6 times longer.

You will need three pairs of blades - one on the machine, one ready to put on and one away for sharpening.

DOUBLE-ENDED blades, made so they can be fitted either way round to give twice as much use out of each regrind.

These limit you to narrow mouldings, up to 30mm.

Tapered design. Bolts on to the left-hand side of your Morso, and supports the length of moulding. 800mm

This is the famous Morso F machine, used by most framers in the UK. They are very reliable and long lasting - getting even better with use.

It comes with sliding stop and your choice of metric or imperial scales which help you quickly set the required rebate length of the moulding.

The cutting head is moved in and out using a lever. (when you receive it , remove the little pin with yellow tape on it - nothing happens until you do!) This allows you to 'eat' your way through mouldings in steps. Making multiple cuts, with your very last cut taking off a thin shaving, ensures perfect joins.

Perspex finger guards and a perspex box guard fitting over the cutting head give good safety protection.

Rebate support, max 38mm
Moulding width, max 100mm
Moulding height, max 160mm

Morso 'F' weighs app. 95kgs. When delivered you will nee

This is the famous Morso F machine, used by most framers in the UK. They are very reliable and long lasting - getting even better with use.

It comes with sliding stop and your choice of metric or imperial scales which help you quickly set the required rebate length of the moulding.

The cutting head is moved in and out using a lever. (when you receive it , remove the little pin with yellow tape on it - nothing happens until you do!) This allows you to 'eat' your way through mouldings in steps. Making multiple cuts, with your very last cut taking off a thin shaving, ensures perfect joins.

Perspex finger guards and a perspex box guard fitting over the cutting head give good safety protection.

Rebate support, max 38mm
Moulding width, max 100mm
Moulding height, max 160mm

Morso 'F' weighs app. 95kgs. When delivered you will nee