Made by Morso using special steel produced in Austria, which gives them an excellent quality and a very long life. The hardness of the blades is HR64 where other brands are often max. HR58.

Morso blades are a little more expensive than other brands but some say they will last up to 6 times longer. These blades do not fit Cassese mitre guillotines.

You should have three pairs of blades - one on the machine, one ready to put on and one away for sharpening.

Made by Morso using special steel produced in Austria, which gives them an excellent quality and a very long life. The hardness of the blades is HR64 where other brands are often max. HR58.

Morso blades are a little more expensive than other brands but some say they will last up to 6 times longer. These blades do not fit Cassese mitre guillotines.

You should have three pairs of blades - one on the machine, one ready to put on and one away for sharpening.

DOUBLE-ENDED blades, made so they can be fitted either way round to give twice as much use out of each regrind.

But, these limit you to narrow mouldings, up to 30mm.

Tapered design. Bolts on to the left-hand side of your Morso, and supports the length of moulding. 800mm

This is the famous Morso F machine, used by most framers in the UK. They are very reliable and long lasting - getting even better with use.

It comes with sliding stop and your choice of metric or imperial scales which help you quickly set the required rebate length of the moulding.

The cutting head is moved in and out using a lever. (when you receive it , remove the little pin with yellow tape on it - nothing happens until you do!) This allows you to 'eat' your way through mouldings in steps. Making multiple cuts, with your very last cut taking off a thin shaving, ensures perfect joins.

Perspex finger guards and a perspex box guard fitting over the cutting head give good safety protection.

Rebate support, max 38mm
Moulding width, max 100mm
Moulding height, max 160mm

Morso 'F' weighs app. 95kgs. When delivered you will need to have some help on hand.
When planning, be aware that the Morso is app. 2150mm / 84" long overall. Allowing for moulding you will need a space app. 4m / 13' long.

Morso F has a 1500mm measuring scale.

We stock many MORSO spare parts - check with our Technical Department.


Framing Equipment Service

Lion have a huge stock of spares for most makes of framing equipment. And if we don't have it - we can usually get it.
Our Technical Specialist is Stewart James-Dyke, on ext. 229, or stewart@lionpic.co.uk He can service most equipment that you bring in, by appointment. Or contact:

Mark Thornton, Yorkshire, 07980 303 715
mt4service@blueyonder.co.uk
Neil Stout, Leicester, 07793 709 123
neil@framingengineer.com
Mark Griffiths, Essex, 07859 818 233
markg94@tiscali.co.uk


For our latest special prices on equipment, click on document below, for further information please contact our sales team.

This is the famous Morso F machine, used by most framers in the UK. They are very reliable and long lasting - getting even better with use.

It comes with sliding stop and your choice of metric or imperial scales which help you quickly set the required rebate length of the moulding.

The cutting head is moved in and out using a lever. (when you receive it , remove the little pin with yellow tape on it - nothing happens until you do!) This allows you to 'eat' your way through mouldings in steps. Making multiple cuts, with your very last cut taking off a thin shaving, ensures perfect joins.

Perspex finger guards and a perspex box guard fitting over the cutting head give good safety protection.

Rebate support, max 38mm
Moulding width, max 100mm
Moulding height, max 160mm

Morso 'F' weighs app. 95kgs. When delivered you will need to have some help on hand.
When planning, be aware that the Morso is app. 2150mm / 84" long overall. Allowing for moulding you will need a space app. 4m / 13' long.

Morso F has a 1500mm measuring scale. Morso F Imperial - to special order only.

We stock many MORSO spare parts - check with our Technical Department.


Framing Equipment Service

Lion have a huge stock of spares for most makes of framing equipment. And if we don't have it - we can usually get it.
Our Technical Specialist is Stewart James-Dyke, on ext. 229, or stewart@lionpic.co.uk He can service most equipment that you bring in, by appointment. Or contact:

Mark Thornton, Yorkshire, 07980 303 715
mt4service@blueyonder.co.uk
Neil Stout, Leicester, 07793 709 123
neil@framingengineer.com
Mark Griffiths, Essex, 07859 818 233
markg94@tiscali.co.uk