F-T 'FLEXIMASTER' HAND Flexipoint Driver

The Fletcher FlexiMaster, green, fires Fletcher Flexible Points.

When fired into the rebate of a frame, they can be bent back to allow the frame back to be removed and replaced.

Points are 0.41mm thick. 6 month warranty.

F-T FRAMEMASTER Rigid Point Driver

The Fletcher FrameMaster, black, is a well thought out rigid point driver, made largely in industrial grade re-inforced polymer.

The whole mechanism has a minimum of moving parts.

Patented design of the nosepiece ensures that the points are driven flush with the backing board when inserted.

Reversing the magazine adapts it to fire either the shorter 8mm Glaziers points or the longer 16mm Framers points. It holds a stick of 100 of either. Both are 0.66mm thick. It will not fire any flexible points.

Most framers use the 16mm long Framers points, which give even pressure on the backing board, and compensate for any cutting errors. 6 month warranty.

F-T MULTIMASTER POINT DRIVER

Fletcher MultiMaster, yellow, fires the uniquely shaped bendable MultiPoints. They are roughly rectangular in shape, with two barbs and a 4.5mm round hole.

The two barbs hold it firmly into the wood and the MultiPoint is bendable allowing the frame back to be removed and re-fitted.

The special feature of the MultiPoint is that it can be used to join two frames together when assembling shadow boxes.

Fire it into the side of the lower frame and then put a screw through it into the upper frame. This holds the two frames together, yet allows them to be easily dismantled. 6 month warranty.

F-T AIR FrameMaster Driver

Air FrameMaster / Air FlexiMaster

Pneumatic point drivers made in USA by Fletcher have a unique technical design which fires the points tight and flat to the backing board surface. They require no 'pull-back' and can work to right or to left.

The magazines take special long strips of either 250 F-T Framers Points or 425 F-T Flexi Points.

The ergonomic trigger is operated by the forefinger, rather than the pinkie, for more comfort.

Designed for use in framing workshops which are too busy for hand manual drivers. Not designed for high production.

F-T AIR FlexiMaster Driver

Air FrameMaster / Air FlexiMaster

Pneumatic point drivers made in USA by Fletcher have a unique technical design which fires the points tight and flat to the backing board surface. They require no 'pull-back' and can work to right or to left.

The magazines take special long strips of either 250 F-T Framers Points or 425 F-T Flexi Points.

The ergonomic trigger is operated by the forefinger, rather than the pinkie, for more comfort.

Designed for use in framing workshops which are too busy for hand manual drivers. Not designed for high production.

Push Plate Kit (Framemaster)

Push Plate Kit for F-T AIR FrameMaster Driver (Part no. 5125).