STEEL BAND FRAME CLAMP A 5m

These have a steel tensioning mechanism and steel banding, which cannot stretch. The corner pieces are plastic. Side handle is unlocked and banding fed out before locking, and tensioning with the main handle.

Rectangular frames:
A - Medium Duty, with 6mm wide banding.

Lubricate screw threads regularly. Do not over-tighten.

The spring around the coil of banding should be eased around the coil. DO NOT pull the banding out of the coil.

STEEL BAND FRAME CLAMP B 7m

These have a steel tensioning mechanism and steel banding, which cannot stretch. The corner pieces are plastic. Side handle is unlocked and banding fed out before locking, and tensioning with the main handle.

Rectangular frames:
B - Heavy Duty with 10mm wide banding.

Lubricate screw threads regularly. Do not over-tighten.

The spring around the coil of banding should be eased around the coil. DO NOT pull the banding out of the coil.

FLETCHER PUSH POINTS CARD of 50 app

Flechter PUSH POINTS for use with Fletcher PUSH MATE TOOL (Part no. 2757).

FLETCHER PUSH MATE TOOL

If you aren't yet ready to invest in a point gun, the PUSHMATE tool is ideal. Use it to push in Fletcher PUSH POINTS (with a lip) or TRIANGLES. Specially shaped so that you can push them in easily to hold the 'sandwich' in the back of your frame quickly and neatly.

FrameCo PUSHMASTER Framing Tool Kit

This helps you insert V-nails to join a frame and also insert framers points, flexipoints and brads.

It consists of a round metal handle, with one end specifically shaped and fitted with a sprung magnetic tip.

Clamp the four pieces of mitred moulding in a cord or steel band clamp. Lay face down on a smooth surface. Place a V-nail, sharp edge down, on the side of the magnetic tip.

Hold the PUSHMASTER vertically over the join line, and push down. If more pressure is required, use a small mallet.

To secure the back in place, place framers point, flexi or brad in the slot on the side of the tip.

Kit complete with 2 sizes of wedges, backing nails, flexipoints and instruction sheet - enough for app. 50 frames. Suitable for softer wood mouldings only.

Logan FITTING TOOL

A clever tool to gently but firmly insert brads, Framers Points and Flexipoints into wood mouldings, to hold the back in place.

Patented rotating foot takes four different kinds of inserts. Works on soft and hard woods.

T-225 FLEXIPOINT DRIVER

Fires standard shape 15mm flexipoints.
Flexis are easily bent up to allow a frame back to be removed. Semi-Rigid are best for normal picture frames.

Die-cast body and carefully engineered internals make it reliable and ideal for home framers.

Firing pressure is adjustable to suit different woods.

SPARE MAGNETIC TIP FOR FrameCo PUSHMASTER

Spare magnetic tip for FrameCo PUSHMASTER (Part no. 3592).

Flexible Points Standard 15mm Bx 2,500

Flexible points for T-220 Flexipoint Driver (Part no. 5810). Box of 2500.

Spare Spring for FrameCo PUSHMASTER

Spare Spring for FrameCo PUSHMASTER (Part no. 3592).

Flexis - Semi Rigid Bx 2,500

Semi-Rigid flexipoints for T-225 Flexipoint Driver (Part no. 5810). Box of 2,500.