A rigid baseboard with a spring hinged aluminium running rail. The bevel-cut and straight-cut heads fit onto that rail.

Measuring and marking are made simple with a parallel adjustable back gauge, with scale and lock. An engraved guide line on the bevel cutting head tells you precisely when you have reached the start and stop lines, which you mark with a pencil.

A mount cutter for the semi-professional. Includes '2000' bevel head and straight cutting head.

Working length: 750mm / 29½".

The new Compact 350-1 Elite, 7501, includes a squaring measuring arm.

Uses '270' blades.

Base has small sharp pins underneath, to locate it on a centring cross you draw on the mountboard. The oval size differential setting is locked with a thumb screw.

The 3-Step carries the cutting blade on a pivoted head with a little lever, supported on a small wheel.

You click the blade down one notch, and cut one turn. Then another notch and another turn, and so on.

Scales are metric and imperial. Uses '324' blades (Part no's. 3920 & 1749).

Ovals: 75mm x 115mm / 3" x 4½" to 508mm x 585mm / 20" x 23".
Circles: 110mm / 4½" to 508mm / 20" dia.

Extruded aluminium straight edge with rubber insert strips to grip the surface, except 3686.

One edge has an easy-read metric / inches scale. The other has a specially shaped lip.

Ready to use with any of the Logan 2000 / 302, 3000 or 4000 cutters.

Nylon guides included, which screw to the cutters.

Complete mount cutting kit - with a Logan 2000 hand bevel cutter with special indicator so it is easy to know when to start and stop.

Straight edge can also be used with 701 Straight Cutting head (Part no. 3879), or the Mat Knife (Part no. 1606).

Complete mount cutting kit - with a Logan 2000 hand bevel cutter with special indicator so it is easy to know when to start and stop.

Straight edge can also be used with 701 Straight Cutting head (Part no. 3879), or the Mat Knife (Part no. 1606).

Oval base is located by pins onto cross marks drawn on the mountboard. Easy adjustment from circles to ovals with a maximum oval differential of 75mm / 3".

The M-1100 blade (Part no's. 2754 & 2974) is guided by a tracking guide wheel, and is raised and lowered into the cut with a finger lever. Start/stop marks are minimised by the tracking wheel.

Comes with 5 blades and 6 months warranty.

Cuts:
OVALS: 114mm / 4½" to 610mm / 23"
CIRCLES: 114mm / 4½" to 534mm / 20" dia.

This mount cutter made in the USA by Logan, is a cost effective and versatile mountcutter.

It incorporates many special features:

• Teflon coated cutting bar for smooth operation. Serrated underneath to grip the mountboard.
• Cuts board up to 1016mm / 40", with borders up to 133mm / 5¼" wide. Support arms 225mm and 685mm included.
• Production stops on cutting head means no marking out with a pencil.
• Straight and bevel cut blade holders on single cutting head, with self-lubricating Derlin bearings with lifetime guarantee.
• Takes double-thick board.
• Micro calibration stop, Flush-cut squaring arm.
• 1145mm / 45" long overall.

Uses '269' blades.

Extruded aluminium straight edge with rubber insert strips to grip the surface, except 3686.

One edge has an easy-read metric / inches scale. The other has a specially shaped lip.

Ready to use with any of the Logan 2000 / 302, 3000 or 4000 cutters.

Nylon guides included, which screw to the cutters.

Our lowest cost multi-featured mount cutter with 1016mm / 40” hinged bar.

Bevel cut head has an ergonomic shape, the unique Logan blade guide slot and an anti-crawl pin, to stop it moving back as the blade goes in.
Straight-cut head has three blade depth positions for mountboard & foamboard.

685mm right-hand squaring arm helps you measure and cut sheets of mountboard down to size. Parallel back mat guide allows you to set accurate border widths.

Twin adjustable stops mean that you don’t always need to mark mounts with pencil before cutting. The baseboard has a durable grey laminate surface.

You can cut Jumbo size mountboard by simply removing the right hand squaring arm in order to feed your full sheet of board along the base. It is best to mark your mount first. Logan 301-S & 450 cutters can also be used in this way.

Uses #270 blades

A simple hand bevel mount cutter. Fixed blade, cutting at 45°. Use against any straight edge, or free-hand for curves.

Uses '324' blades.