DALER STANDARD S/ADH Board 1.4mm 1 sheet

Board coated on one face with a cold, sticky, pressure-sensitive adhesive, protected with a release paper, overprinted dark grey.

Ideal for mounting many kinds of lightweight, low value prints.

Use with care. Fold back ½" / 10mm strip of the release paper along one edge, then position item to be mounted. Pull release paper from below, smoothing out air bubbles as you go. NEVER pull off the release paper first. Use with brayer rollers or cold laminators.

Available in 1.0mm, 1.4mm & 2.0mm. Size 1120mm x 815mm / 44" x 32".

We do not recommended this board when the mounted print is to be over-varnished.

Standard, 1.4mm thick; only despatched in full pack quantity - 15.

DALER STANDARD SELF-ADHESIVE BOARD 2.0mm 1 sh

Board coated on one face with a cold, sticky, pressure-sensitive adhesive, protected with a release paper, overprinted dark grey.

Ideal for mounting many kinds of lightweight, low value prints.

Use with care. Fold back ½" / 10mm strip of the release paper along one edge, then position item to be mounted. Pull release paper from below, smoothing out air bubbles as you go. NEVER pull off the release paper first. Use with brayer rollers or cold laminators.

Available in 1.0mm, 1.4mm & 2.0mm. Size 1120mm x 815mm / 44" x 32".

We do not recommended this board when the mounted print is to be over-varnished.

Standard, 2.0mm thick; only despatched in full pack quantity - 5.

DALER STANDARD S/ADH BOARD UNTRIMMED 1mm

Board coated on one face with a cold, sticky, pressure-sensitive adhesive, protected with a release paper, overprinted dark grey.

Ideal for mounting many kinds of lightweight, low value prints.

Use with care. Fold back ½" / 10mm strip of the release paper along one edge, then position item to be mounted. Pull release paper from below, smoothing out air bubbles as you go. NEVER pull off the release paper first. Use with brayer rollers or cold laminators.

Available in 1.0mm, 1.4mm & 2.0mm. Size 1120mm x 815mm / 44" x 32".

We do not recommended this board when the mounted print is to be over-varnished.

1mm Standard only available untrimmed and loose, for collection from Trade Counters.

Daler XTRA-TAK Self-Adhesive 1.4mm 1 sheet

Self-adhesive board developed for mounting heavier items such as photographs, textiles, tapestries, heavy-weight papers and general items requiring extra adhesion.

The surface is re-positionable to a very limited degree before a permanent bond is formed. Peel-off backing paper, over-printed blue, has instructions for use.

Size: 1120 x 815mm / 44" x 32". 1.4mm thick. Packed in 15's.
Single sheets - COLLECTION ONLY.

Colourmount Thick Tak 3mm 1200x1000mm 1sht

Colourmount Thick Tak 3mm Self Adhesive Combined Mounting & Backing Board

Thick, 3mm pulp board, PEFC standard, with standard tack self-adhesive on the face, protected by a release paper, and with brown kraft paper on the back.

The lamination on both faces makes the board quite flat and rigid.

Thick Tak lets you mount the image on the face and the kraft lined back gives an attractive look to the back of the framed art and saves you time.

1200mm x 1000mm / 47" x 39", 3mm thick. Only despatched in full pack quantity - 5.