A modern, heavy duty counter fixing paper roll holder.

Easy to use tear-off bar. Takes rolls up to 1000mm / 39" wide. Neat, safe and professional. Fix on wall or under counter.

The balancer suspends air tools from a hook or track in the ceiling.

The adjustable sprung re-coil cord is fixed to the tool and carries it’s weight.

Careful adjustment allows the tool to be raised and ‘parked’, ready for the next operation.

It reduces operator fatigue and minimises risk of it being dropped on the floor. Generally, tools which have been dropped on the floor are not covered by warranty.

Standard (Part no. 6205) for tools up to 1.5kg and Super for tools up to 3kg. Cord lengths app. 1.2m.

To cover machines and presses.

They protect them from dust which settles overnight. Made from polycotton, seamed all round.

Colour generally green or maroon. 1220mm x 915mm / 48" x 36" app.

The smooth grey surface allows fine blades to penetrate without blunting. It is ideal when trimming prints. Small cuts almost disappear.

Deep gouges will NOT heal up. It is designed for light use only, and is not suitable as a base on which to cut hardboard with a utility type knife. (Tip - if you want a surface for cutting hardboard, use a piece of old carpet).

Alignment grid on one side - but don't rely on the accuracy of the scales.

230 x 300mm / A4.

The smooth grey surface allows fine blades to penetrate without blunting. It is ideal when trimming prints. Small cuts almost disappear.

Deep gouges will NOT heal up. It is designed for light use only, and is not suitable as a base on which to cut hardboard with a utility type knife. (Tip - if you want a surface for cutting hardboard, use a piece of old carpet).

Alignment grid on one side - but don't rely on the accuracy of the scales.

300 x 450mm / A3.

Flat ribbed black rubber sheet on the roll. Ideal for covering workbenches.

Any pins or fragments of glass fall into the grooves, where they are out of the way, yet can be easily swept away. 3mm / 1/8" thick. 915mm / 36" wide. Sold by the metre, minimum 2 metres.

Bracketed to the ceiling at a suitable height. Kit comes with two sliding carriers and two end stops. Used to carry tool balancers, for air tools. Add further carriers as needed.

Additional sliding carriers for use with Overhead Sliding Track Kit (Part no. 3163). 2 sliding carriers and 2 end stops.

List Price: £464

Xpress Price: £420

You save: £44 (9.5%)

Keencut Proteus Framers Tables

For your framing workshop, the Keencut Proteus system is available as ready-to-build kits for worktable / mountboard storage units in two sizes from 1170 x 876mm / 38" x 36".

Frames of the tables are precision satin-anodised aluminium extrusions. These slot into joining brackets and which lock with an Allen key.

Mountboard storage within the unit is created with smooth internal base channels of interlocking extruded plastic with wire rod dividers. See also the Ultimo II Mountboard Storage Cart (Part no. 7539) which can roll under the Proteus.

Worktops for Proteus tables are not provided. The ideal material is 18mm MDF. Tables are 900mm high.

Cantilever mountcutter supports bolt onto any upright, allowing you to position your cutter anywhere.

The Keencut Proteus system is available in a wide choice of styles and components. Visit their website for more information.

Cantilever mountcutter supports for Keencut Proteus Framers Tables (Part No's. 3831 & 3780).

They bolt onto any upright, allowing you to position your cutter anywhere. 400mm, 1 pair.