LONG T-HANDLE ALLEN KEY FOR MORSO 5mm

There are actually four blades on a 'Morso' type machine.

The two square edged fixed bottom blades often need fine adjustment when changing blades.

This special long Allen key has a cushion grip making that adjustment easier and safer. 5mm x 230mm.

AMBERCLENS ANTI-STATIC FOAMING CLEANER 400ml

Amberclens is a highly versatile combination of solvents, detergents and surfactants formulated to remove a wide range of dirt, grime and staining from a variety of surfaces. The deep cleaning foaming action of Amberclens is particularly effective on textured plastics such as vinyl seating and computer hardware. Ideal for cleaning framing equipment etc. 400ml aerosol.

LIGHTER FLUID 100ml

Essential for cleaning greasy marks off almost anything.

Gets marks off mounts, prints, photos etc. Cleans the gunge which builds up on machines.

Use with clean tissue for best results. Flood it on and it dries in seconds. Naptha based, so obviously flammable - store and use with care. 100ml


Mount Cutter Maintenance:

Regular calibration and cleaning of your mountcutter is essential. Always keep it covered with a cloth when not in use, this will keep off the dust which settles overnight.

KeenCut mountcutters should only be cleaned with a dry cloth and vacuum. Stubborn marks may be removed with a damp cloth with a little detergent.

To clean Fletcher-Terry and C&H cutter bars use Lighter Fluid. Lay a piece of scrap board under the running rail to protect the baseboard and squirt fluid over the rail. Work in with tissue paper and clean off all the accumulated dirt.

When dry, spray Bondloc Dry PTFE Lubricant onto the rail and work the head up and down before cleaning off all the excess. Use this also in the chute of your underpinner, etc. Silicone free.

GT-85 Spray Lubricant 400ml

GT85 Maintenance Spray With PTFE

An effective penetrator, water displacer, rustproofer and dry lubricant. Silicone free.
It has a CFC-free propellant, so is environmentally friendly.
Useful when servicing underpinners, Morsos, etc.
GT85 is in a large 400ml aerosol.

SG-85 White grease 200ml

SG85 is white lithium grease in a spray can.

It doesn't have the 'gloopy' consistency often found in standard lithium grease.

Use SG85 where long term and clean greasing is required. It is ideal for nylon and plastic parts as well as metal. It is ideal for the frame shop, where it is better than oil on a Morso.

With a CFC-free propellant, SG85 White Grease is environmentally friendly.

Bondloc Dry PTFE Lubricant 400ml

Mount Cutter Maintenance:

Regular calibration and cleaning of your mountcutter is essential. Always keep it covered with a cloth when not in use, this will keep off the dust which settles overnight.

KeenCut mountcutters should only be cleaned with a dry cloth and vacuum. Stubborn marks may be removed with a damp cloth with a little detergent.

To clean Fletcher-Terry and C&H cutter bars use Lighter Fluid. Lay a piece of scrap board under the running rail to protect the baseboard and squirt fluid over the rail. Work in with tissue paper and clean off all the accumulated dirt.

When dry, spray Bondloc Dry PTFE Lubricant onto the rail and work the head up and down before cleaning off all the excess. Use this also in the chute of your underpinner, etc. Silicone free.

'Dust-Off' Air Duster 530ml

Bitter taste added to help discourage inhalant abuse. 100% Ozone Safe Potent dust-removing power, and large size can gives great value. Ideal for blowing dust off glass and plastic, and for cleaning printers, etc.
Big 530ml can

Rubber Dust Blower

Handy little device for blowing dust out of crevices on printers and similar. Nozzle is 2.1mm o/d, so with a piece of 2mm i/d tube pushed on and a finger over the one way valve, it might be used for sucking dust out of a frame. 40mm dia, 95mm o/a.