TELUM Hand Pad RED 90mm x 55mm

TELUM Glass Smoothing Pads - Diamond Faced Foam Pads

Ideal for sanding off awkward nibs.
Essential for smoothing the sharp edges of glass when you are making up a clip frame. (very handy about the house - try one for re-sharpening the kitchen knives).

TELUM hand pads have the hard industrial diamond dust 'plated' into nickel dimples on the special interlocking surface pattern.
Block of stiff foam 90mm x 55mm. For longer life, always use them in a circular motion when working along a cut edge. Wetting the pad also helps.

WOOD HANDLE ONLY FOR QRS ABRASIVE SHEETS

Handle with Replaceable Diamond Pad

Shaped wooden handle, app. 130mm x 55mm with a Velcro-type (QRS) surface to mate with replaceable sheets.
QRS sheets are - RED for fast, general smoothing, or YELLOW, which is so fine it gives a semi-polished finish. Pads are 130mm x 55mm.

QRS DIAMOND SHEET - RED

QRS sheets are - RED for fast, general smoothing, or YELLOW, which is so fine it gives a semi-polished finish. Pads are 130mm x 55mm.

QRS DIAMOND SHEET - YELLOW

QRS sheets are - RED for fast, general smoothing, or YELLOW, which is so fine it gives a semi-polished finish. Pads are 130mm x 55mm.

Fisco UNI-MATIC TAPE MEASURE 3m / 10ft

FISCO, compact dual 3m/10ft. Polyester coated carbon steel blade, side lock brake, self-zeroing end-hook, automatic blade return and belt clip. Made in UK.

BRADAWL - CHISEL POINT

To make starting holes. Hardened point. Made in UK.

BRADAWL - NEEDLE POINT

To make starting holes. Hardened point. Made in UK.

PIN HAMMER 110gm

A light hammer for delicate tasks.
App. 4oz forged and heat treated head, polished wood handle. 110gm.

NAIL SET 2.5mm / 3/32"

Slightly hollowed tip, 2.5mm to set a nail just below the surface. Hardened steel.

LION 3m / 10ft Tape Measure

3m/10ft tape.  Black ABS case, brake-lock and an effective bump stop. Made in UK.

F-T 'PULL-MATE' TOOL

A specially made handy tool for quick and easy removal of Fletcher Framers or Glaziers Points from wood frames.

GIMLET

Hand drilling tool for making 3mm holes in moulding for screw eyes etc.

FLETCHER SPRING MATE FOR ALUMINIUM FRAME

For removing packing springs from side-loader aluminium frames. Easier than a screw-driver.

PRO-TRIM PAPER TRIMMING KNIFE

Wooden handle with metal blade holder and offset guide. Uses SM02, SM03, Dexter 3 and similar blades. Side guide insets blade by about 3mm. Easy to guide round back of frame to trim paper cover neatly.

'TWIRLER' SCREW EYE TOOL

Use the spike to make a starter hole for the screw eye. Then start the eye with your fingers as normal. Once started, put the spike into the eye, and twirl the tool round. This very quickly screws the eye into the wood.

The end of sore fingers!

'HASSLE-FREE' PAPER TRIMMER

Moulded plastic handle, to take almost any rectangular blade. It is inset about 3mm from the edge, and the moulding projects to form a guide.

2.5mm i/d DEPTH COLLAR

To stop you going too deep with pilot holes, use the special depth collar which fits onto 2.5mm and smaller drill bits.

THOR SOFT FACED HAMMER

Tap the sections of an aluminium frame or stretcher bars together for perfect alignment.

Made in UK by Thor. Comes with medium & soft faced heads.

HEX KEY SET- BALL END METRIC 2 - 10mm 10pcs

Special feature of a 'ball end' makes it much easier to insert them into the bolt head.
Allows you to work at an angle of up to 30° away from vertical.
Chrome vanadium steel, plastic clip.
Metric, 2 - 10mm, 10 pieces.

HEX KEY SET- BALL END IMP. 1/16"-3/8" 10pcs

Special feature of a 'ball end' makes it much easier to insert them into the bolt head.
Allows you to work at an angle of up to 30° away from vertical.
Chrome vanadium steel, plastic clip.
Imperial, 1/16" - 3/8", 10 pieces.