How to Frame Graphic Panels with an Aluminium Art Frame

Give a polished finish to graphic panels such as Chromaluxe™ by framing them with a contemporary aluminium frame profile. See how easy it is to assemble your aluminium frame using Corner Hardware Kits that contain everything you need – all you have to own is a screwdriver!

See the full range of Aluminium Art Frames. See our easy to use assembly & hanging kits.

  • Measure a graphic panel

    1) Measure the graphic panel, both height and width. Cut aluminium moulding with an aluminium saw or use our Chop Service.

  • Aluminium Frames Hardware

    2) Place the two plates of the corner hardware together and slot them into the top corner of the mitre aluminium frame.

  • Double Plate Hardware

    3) Screw into place with screwdriver, repeat this process for the other top corner.

  • Frame Printed Graphic Panel

    4) Slide in the graphic panel into the aluminium art frame.

  • Aluminium Moulding Hardware

    5) Slot in the bottom length of moulding and tighten the remaining two corner hardware plates.

  • Aluminium Hardware Bow Springs

    6) Use bow springs to secure the panel in the frame.

  • CWH Picture Hangers

    7) Add CWH3 hangers 1/3 of the way down the frame and secure in place with a screwdriver.

  • 8) Stick foam bumpers to both bottom corners of the frame, this is to help the panel hang flat and protect the wall.