Materials & Equipment for Picture Framing and Wall Décor Professionals £50 minimum order

LION from Tech Mark

Here you will see the products listed in the Lion advert in January's edition of PFM Magazine.
You can click through to each product or browse the website to see our full range.

SUB-15 Sub-Frame Profile for Panels

Profile bonds with VHB or similar to alu, ACP, acrylic, etc. Stiffens the panel and aids hanging. Panel floats 15mm off the wall. Lion push-in corners make assembly easy.

Push in moulded corners for Sub-Frame Profiles

Panel Hanging Plates

Steel plates with hanger bridge and instant-grab adhesive. For hanging graphic panels on di-bond, ACP, alu, etc.

Panel Hanging Plates

Bumpers in Polyfibre Felt

Un-dyed polyfibre felt bumpers, 3mm, 5mm or 7mm thick. In pairs on a backing paper making them easy to peel and stick.

Polyfibre Felt Bumpers

Heavy-Duty Keyhole Hangers

Tough steel keyhole plates fit to the frame. Brass bosses are screwed to the wall. Can take frames up to 15kg, subject to quality of installation.

Heavy Duty Keyhole Hangers

Perlon Guide

When fitted to frames on hanging systems, they will not angle forwards so much.

Perlon Guide

TiN Edge Matt Cutter Blades

Super hard titanium nitride coated edge cuts smoother and lasts much longer.

TiN Edge Matt Cutter Blades 7443

CWH Square Sawtooth

The best alternative to wire yet. Fit in pairs and frame hangs on two hooks, pins or screws into wall.

CWH Square Sawtooth Hangers

Safe & Secure Hanging 

Safe and secure hanging of frames and mirrors. Locks onto almost any size of screw in the wall.

Safe Secure Hanging 2954

Safety Hanger

Fit two on the corners of the frame and they wiggle onto two screws in the wall. Remove only by wiggling again.

Safety Hanger 9630

Safety Hook Heavy-Duty

The restraining clip allows the wire to slide in, but resists accidental or deliberate removal. Takes 15kg/30lb. 



Tech Mark, Inc - 7901 Industry Drive - North Little Rock, AR 72117

Tel: 501 945 9393 - - Fax: 501 945 0312 -