This product is no longer available.

3463 RabbetSpace No.1 Phillips Screwdriver Bits pack 2

The RabbetSpace Rebate Extender Strips should be mitre cut then fixed with the small screws

Note: The drill bit may vary from the one in the picture, depending on availability. 

These #1 x ¼” Phillips hex screwdriver bits are a perfect fit into the small black screws which are used.

RabbetSpace profiles are fixed using small black screws in pre-drilled holes. The two-stage drill bit combines two drills. One makes a 1.5mm hole in the RabbetSpace the size of the shank of the screw and the other makes a smaller hole of the right depth in the moulding. Use it with an electric screwdriver.