This product is no longer available. Please see 6926B for an alternative.

6926C CWH2 Sawtooth Hanger 600 Pieces

For frames with flat or papered backs

Depth to fit onto hook or nail. Slots for level adjustment. Fix with screws, length to suit.

CWH2 Sawtooth Hangers, pack of 600 pieces

Other CWH2 packs available:

6926A 50 pieces, 6926B 200 pieces, 6926D 2000 pieces

Use CWH Sawtooth Hangers in 4 easy steps:

1) Fix CWH Hangers to the frame - Position and mark approximately 1/3 down from the top of the frame. Put one screw in an oval hole of each.

2) Position and fix the wall hooks - Using the frame as a guide place two post it notes in approximate hook positions. Lightly hammer hooks pins to insert into wall.

3) Trial hang the frame - Hang the frame on the hooks and check for general positioning. To adjust levelling use a screw in a slot. Lock CWH hangers into position by inserting a second screw in each.

4) Hang the frame - with CWH Sawtooth Hangers frames hang flat and level on the wall and do not tip forward.

More info:

How to: Fit CWH Square Sawtooth Hangers

How to: Stretch Inkjet Prints onto a Canvas

The name, style, concept and detail of all CWH Square Sawtooth Hangers are parts of an original idea which is © 2009 LION PFS Ltd. All rights reserved.