7512W
Panel Hanging Plates 200mm x 100mm Self Adhesive Kit with wheels

Panel Hanging Plates 200mm x 100mm Self Adhesive Kit with wheels
£8.56 Ex Vat
In Stock (39 available)

Quantity

7512W Panel Hanging Plates 200mm x 100mm Self Adhesive Kit with wheels

A quick and economical way to hang prints on substrates including Chromaluxe, DiBond, Fomex, and acrylic. They allow the panel to hang on almost any hook, nail or screw.

Panel Hanging Plates are used individually on a panel. We always recommend using a Panel Hanging Plate that’s weight capacity is specified above the weight of the artwork being hung. Using two hangers does not increase the weight capacity.

See also our Easy Level Panel Hanging Plates.

Available in various sizes and pack quantities.

Technical Information

- Perfectly flat zinc-plated steel plates, with a horizontal hanging bridge 

- Backed with a high-quality polyethylene foam pad coated with an aggressive pressure sensitive adhesive.

- Recommended weights are based on the manufacturer's recommendations for a single plate. However, it is advised that you carry out your own tests.

- Never thread cord or wire between two hanging plates as this can pull the plates away from the panel. 

Cleaning & Application

- The panel must be cleaned and degreased using an Isopropyl Alcohol Wipes / Spray before the panel hanging plate is fixed in place. For best results allow 24 hours for the adhesive to cure before hanging.  

- Apply only to clean, dry, flat, dust-free and non-porous substrates. Not suitable for soft surfaces such as paper, mountboard, or similar. 

- Bumpers can be placed at each bottom corner to help the panel hang flat on the wall.

Specification

Type

Hanging plates

Colour

Silver

Material

Steel

Quantity

1

Length

200mm

Brand

Other

Max Load

7.2kg

Downloads

DuploCOLL® 5009.pdf - 106.65 KB

Download

Questions

Please feel free to ask any questions about this product.