This product is no longer available.

9928 Logan Mitre Saw Fence Kit 1345mm

Mitre saw measuring fence and stop kit for many mitre saws

Measures and helps accurate mitre cuts up to approximately 1345mm.

This kit, developed and made by Logan in USA, can be fitted to work with many hand and single-blade electric mitre saws. The printed measuring scale, metric only, allows accurate measuring of the rebate length of the moulding to be mitre cut. The adjustable stops ensure that each piece in a mitred pair is exactly the same length.

The short and long fences are cut from a substantial custom aluminium extrusion. Support brackets are in two parts. The upper brackets twin-bolt to a T-slot in the underside, to allow lengthwise adjustment. The wide, stable, bottom brackets have slots with twin-bolts for vertical adjustment.

+ Works with many hand and single-blade electric mitre saws (saw not included) and with most wood and PS mouldings. There are lots of saws to be found on the web. Tip – buy the most expensive one you can afford.

+ Left hand fence measures and cuts mouldings up to 1345mm long and up to 65mm wide. Right-hand feed-in support is 565mm. Fences are 70mm wide, with back face 45mm high.

+ We advise that you build up your saw on a base board around 2200mm x 400mm, 18mm thick. This allows for both parts of the saw fence and the width of the saw. Good plywood is best. Build the short right-hand fence, the mitre saw and the long left-hand fence up on that. Use something very straight, or a taught string, to align the back fences of all three.

+ The twin length stops are finger adjustable and designed not to touch the pointed end of the moulding, so no damage. Users can set the short and long lengths at the same time.

+ Mouldings should be clamped into place with hand ratchet clamps (not included).

Supplier ref: #F100-5-MET