Panel Hanging Plates EE Angled 80mm x 60mm 5 pairs

£6.72 Ex Vat

In Stock (36 available)

See more products in the following ranges:


9979A Panel Hanging Plates EE Angled 80mm x 60mm 5 pairs

Perfectly flat zinc-plated steel plates, with a angled, micro-sawtooth hanging bridge

Made to our design and specification in EU, these unique new Panel Hanging Plates have angled hanging bridges with micro-sawtooth edges. This has the effect of making them very easy to level simply by pushing the panel a little bit side-to-side. Standard panel hanging plates are designated E, etc. The angled panel hanging plates are the same sizes and are designated EE, etc.  

They are self-adhesive with easy-peel backing paper and are fitted to panels in handed pairs. Take care to always prepare the panel surface with a solvent wipe before sticking the plates in place. 

The Angled Plates sit on almost any firm hooks, nails or screws in the wall.

Estimated safe working load, based our experience and judgement, 2.5kg when used in pairs.

Bumpers, not included, can be placed at each bottom corner to help the panel hang flat on the wall.

Adhesive & Application

- All plates are backed with a high-quality polyethylene foam pad with an aggressive pressure sensitive adhesive on both sides. The paper release liner is slightly larger than the plates to make for easy peeling.

- Always prepare the surface with a solvent wipe prior to applying the hangers. See 9837 (sachets) or 9838 (tub).

- Apply only to clean, dry, flat, dust-free and non-porous substrates. Not suitable for soft surfaces such as paper, mountboard, or similar.

- Recommended weights are based on the manufacturer's recommendations for a single plate. However, it is advised that you carry out your own tests.

9979A  Panel Hanging Plates EE Angled 80mm x 60mm  Pack of 5 pairs

See also:

9978B  Panel Hanging Plates BB Angled 100mm x 100mm Pack of 50 pairs

9979A  Panel Hanging Plates EE Angled 80mm x 60mm Pack of 5 pairs

9980A  Panel Hanging Plates FF Angled 80mm x 80mm Pack of 5 pairs

9837    Solvent Wipes 100 sachets

10228  V Hook for pictures. Pack of 100 with pins

9773A  Self Adhesive Polyfibre Bumpers pack of 200

9773    Self Adhesive Polyfibre Bumpers pack of 1000

The Panel Hanging Plates Angled are Registered European Community Design No. 007463690-0001 Hanging Plate for LION Picture Framing Supplies Ltd

Product introduced February 2020


Please feel free to ask any questions about this product.

0 Questions

Ask a question


TypeHanging plates
ForPanel hanging
Max Load2.5kg