10523 Kool Tack Dry Mount Adhesive Pulp Board 1.4mm 1020mm x 810mm 1 sheet

Pulp board with heat-activated dry mount adhesive coating

Papers and thin card bond to it at lower than normal temperatures. Works with most heated vacuum and flat-bed presses. Use it for general mounting work in picture framing workshops, display studios and similar.

+ Face has a white paper liner coated with the heat-activated acid-free pH neutral adhesive. This helps long term preservation of the artwork

+ Core is solid wood pulp off-white, buffered with CaCo3 to pH 7.7 – 8.5

+ Back is white paper

+ Thickness: 1.4mm. Sheet size: 1020mm x 810mm

+ Adhesive has a short dwell time of around 15-20 seconds, quicker than many other dry mount boards. Works with most heated flat bed, vacuum and roller presses

+ Lower bonding temperature of 65°C-70°C to help minimise rippling of the art on paper and discoloration of inks

+ Kool Tack is reversible and can be re-used up to three times with care. This gives peace of mind and can reduce wastage should errors occur

+ The adhesive surface has minimal tack at room temperature, helping to minimise dust accumulating on the surface. Kool Tack boards should be stored flat, covered, at room temperature and average humidity.

On the Crescent quality scale, 10523 is rated GOOD. Kool Tack ref: KT3240W  Made in USA

See also:

Click here for Heat-activated adhesive coated foam boards for dry mounting papers and canvases 

2690 Colourmount Speedmount Heat-activated dry mounting board

Z02

Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.