New to Framing? get started here
2104 Daler Standard 1.4mm Self Adhesive Board 1120mm x 815mm 1 sheet
|15 or more||£7.62||Save 12.00%|
2104 Daler Standard 1.4mm Self Adhesive Board 1 sheet
Grey core board coated on one face with a cold, sticky, pressure-sensitive adhesive
Protected with a release paper, overprinted dark grey with instructions. Ideal for mounting many kinds of lightweight, low value prints.
Use with care, follow instructions on release paper. Use with a brayer roller or roller laminator.
This STANDARD self-adhesive is 1.4mm thick. Sheet size: 1120mm x 815mm / 44" x 32"
Made in UK. Use is not advised when the mounted print is to be varnished.
With self-adhesive boards, always peel back a little bit of release paper and align the item to be mounted. Then peel back more and press down as you go. Use a brayer roller to bond it down fully, rolling all over in both directions. The acrylic adhesive develops full bond over two days.
Working with self-adhesive materials in cold weather? When the temperature drops remember to let self-adhesive tapes, PVA glues, boards and mounting films come up to room temperature before using them. Keep them that way for a few hours after application while the adhesives cure.
Mixed Sheet Despatch: Ordering sheet material from LION is easy, you don't have to order in full packs. Mix and match single sheets of mountboard and other selected sheet materials. You just need to order a mixture of at least ten sheets in total.
Mixed Sheet Despatch
Mixed Sheet Despatch Info Doc.pdf - 284.09 KB
Also in the Range View Range
In Stock (50 available)
In Stock (481 available)
Out of Stock
More expected Tuesday 31 May 22
Please feel free to ask any questions about this product.