Rivet Setting Tool and Anvil Disc Set

Rivet Setting Tool and Anvil Disc Set
£8.20 Ex Vat
In Stock (82 available)


952 Rivet Setting Tool and Anvil Disc Set

For fixing D Rings to backing board with 2 Part rivets

For efficiency, first set the anvil disc into a shallow hole in a piece of chipboard or similar.

Then, punch or drill the 3mm hole in board and insert domed top part of rivet through D Ring and board. Push longer bottom part up into rivet. Position board over anvil disc. Use setting tool with light hammer.

The domed head looks attractive with a matching D Ring and the tubular bottom part leaves a smooth finish on the back of the board.

Setting Tool is 59mm x 11mm dia. Anvil is 22mm dia, 5mm thick. Made in UK

See also:

953    Rivets 2 Part Nickel Plated 500 pairs

953A  Rivets 2 Part Bronze Plated 500 pairs

951    Hole Punch 3mm for board and MDF 102mm x 8mm dia

More info:

When correctly installed, a two-part rivet should take up to 2kg, but always test.

Product information updated November 2020







Rivet setting tool


Please feel free to ask any questions about this product.