7mm 'Two Way L' Ash FSC™ Certified 100% Frame Moulding - L1471

Product Description

L1471 7mm 'Two Way L' Ash FSC™ Certified 100% Frame Moulding

Bare Wood Tray Profiles - for Canvases and Flat Panels

Stepped profile gives multiple depth options.

Colour and grain: Very pale brown with heavy darker brown grain.

Cutting: Ash is a hard wood and can only be worked with on professional framing equipment. For the best quality cut, order this moulding mitre cut to size on our Chop Service.

Joining: Joining Ash takes some skill - because underpinners displace the timber fibres as the v-nail is inserted, getting a tight join on dense hard woods can be a struggle. If you work with these timbers, try the Hoffmann Frame Joiner, which routs a slot for a dovetail key. Once tapped into place, the key pulls the corner tightly together.

Finishing: Takes all finishes well. Best finished with a wax or stain to show off the distinctive grain. Take a look at our wide range of finishing products.

Ordering bare woods: We take care to match the grain and colour between lengths as far as possible but it’s important to be aware that bare woods vary more widely than finished woods. Click on our short video to see a longer length. Bare woods can also be a little more prone to warping and twisting.

Stretcher bars to fit:

L1470 40x28mm Two Way

L1947 38x35mm

X203 38x35mm

L1399 (when used with 28mm rebate) 24x44mm