New to Framing? get started here
6977 Mounting Film Cold Twin Release 648mm x 25m roll
6977 Mounting Film COLD Twin-release 648mm x 25m roll
Twin-release film by SeaLion is the easiest type of cold mounting film to use with a brayer roller, a manual roller laminator or a powered roller laminator.
It is easily handled as cut pieces, with less risk of adhesive on an exposed face picking up dust.
Specifcation: Release paper + 25µ adhesive + 50µ base clear film + 25µ adhesive + Release paper. 100µ thick, not including release papers.
Cut a piece to size and pick up and fold back a narrow strip of the release paper on a short edge. Apply to the mounting board, peeling the release paper as you lay it down on the board using a roller press or brayer roller. Then peel up and fold back a narrow strip along one edge of the second backing paper. Carefully position the print on the exposed adhesive.
Finally, peel up the release paper and smooth down the print as you go. Use a brayer roller to squeeze out air bubbles. A roller laminator speeds the task.
Ideal for mounting prints onto substrates including foam board, acrylic, aluminium composite, MDF and most clean, flat, grease free surfaces.
• Clear 50μ base film, coated on both sides with a UV and blanch resistant permanent pressure-sensitive adhesive
• Adhesive will build to maximum strength over 24-48 hours
• Release liners are 120gsm PE coated and silicone coated paper
Also in the Range View Range
More Like This
Please feel free to ask any questions about this product.