Excalibur Counter Balance Service Kit - KEESE01-014

Product Description

KEESE01-014 Excalibur Counter Balance Service Kit

Counter balance service kit for Excalibur 3S and Excalibur 5000 sheet material cutters

Complete replacement cord to suit all sizes of Excalibur, complete with toggle assembly and fixing ring. 

Keencut SKU: SE01-014

How to replace the cord, toggle assembly and fixing ring on all Excalibur machines:

Tools required:

Allen (hex) keys 4, 5 and 6mm 

10mm spanner/wrench 

What to do:

Remove the twin wheel cutter plate and any thin shim spacers from the upper cutting head using a 6mm Allen key. 

Pull the plastic strip away from the top end of the cutter bar and remove the pulley bracket by taking out the two small screws using a 5mm Allen key.  

Slide the upper cutting head and the sliding toggle off the top end of the cutter bar. Slide the new sliding toggle in place ensuring it slides easily along the full length of the cutter bar.  Replace the upper cutting head. 

Refit the twin wheel cutter plate and the shim spacers, tighten the white plastic thumb screw to hold the cutting head in place. 

Replace the two pulleys in the pulley bracket using a 4mm Allen (hex) key and a 10mm spanner/wrench and refit onto the top of the cutter bar.  Replace the plastic strip.  Thread the cord through the pulley bracket and pass the cord down through the top of the machine.

Fix the cord to the ring fixed to the top plate of the machine and loop the cord under the pulley mounted on the Balance Weight.